What’s Proxmark3 X?
The Proxmark3 X is the next updates of Proxmark3 for pentesters and researchers. It’s portable, powerful and wireless design with built-in Bluetooth connection.
Jonathan Westhues published under General Public License, the Proxmark3 has made its way from a DIY project to an almost ready-to-use device capable of analyzing the RFID communication at low frequencies (125 KHz) and high frequencies (13.56MHz).
The Proxmark3 Dev Kit 2 (RDV2) from Elechouse is more portable and brings various improvements to the open source design. Antennas are improved and the connection is through mmcx cables which are a lot easier to find and work with. Antennas can be mounted on the device in various configurations and easily held.
The Proxmark3 Dev Kit 4 (RDV4) from RRG/ProxGrind was released on Kickstarter. Its antennas are highly customizable and there is a new multifunction multiplexing interface to support additional components such as external battery, external active high powered antenna, bluetooth interfaces and more.
Proxmark3 X was released with expanded board with external battery, Type-C socket, Bluetooth connection and independent LF tag operation buttons. It can work alone on ID Tag and run all PM3 commands with Android App without Windows Program.
Proxmark3 X *1
Type-C Cable *1
- HF S50 Keyfob *1
- HF S50 Card *1
- LF ID-T5577 Card *1
- HF IC-UID Card *1
- HF CUID Card *1
How to Flash Firmware
Via Command Line
- Connect Proxmark3 X to Windows or MacOS while pressing the PM3 Button.
- Exclude the command below
proxmark3 /dev/tty.usbmodemiceman1 --flash --unlock-bootloader --image bootrom.elf --image fullimage.elf
Via RFID Tools App
- Copy bootrom.elf and fullimage.elf to the phone.
- Connect Proxmark 3 X with via OTG.
- Go to Tools > PM3 Firmware Flasher and select the firmware files.
- Click Flash to flash the firmware.
The Latest Firmware of Proxmark3 X
It is well supported with RFID Tools app with Bluetooth and USB.
Download Now >> Proxmark3 X Firmware – PM3RDV4